Air Flow Meter DS350
specification :
Measured variables: m/h, m/min, l/min or cfm, m/s (standard: DIN 1945, ISO 1217 at 20?C and 1000 mbar) mass flow on request (kg/s, kg/min, kg/h)
Principle of measurement: calorimetric measurement
Sensor: Pt45, Pt1000
Measuring medium: Air, gases
Operating temperature: -30 ... 140C probe tube -30 ... 80C housing
Operating pressure: up to 50 bar
Analogue output: 4 ... 20 mA (max. burden < 500 Ohm) Scaling: 0 to maximum flow rate (see tables on pages 10-15) Accuracy: 0.06 mA
Pulse output: 1 pulse per m? (see pulse diagram on page 8), max. Voltage: pulse +P = +VB, active signal max. Flow l = 10 mA
Power supply: 12 to 30 VDC
Power input: max. 80 mA at 24 VDC
Accuracy: 3% m.v.
With meas. section 2% m.v. (option via 5 point ISO precision calibration) These data are just valid in connection with a measuring? Section.
Accuracy: 4% m.v.
without meas. section 3% m.v. (option via 5 point ISO precision calibration) These data are just valid in case of correctly programmed inner diameter
Display: 128 x 64 pixel, with backligth Measures values in maximum 6 digits, Counter max. up to 99,999,999 l resp. m drops then back to 0
Units: m/h (standard factory settings) selectable via software m/min, l/min, l/s, ft/min, cfm
Screw-in thread: 1/2"
Material: Probe tube and screwing: stainless steel 1,4301
สอบถามข้อมูลเพิ่มเติม >>>> 0 2594 5563 คุณสัญชัย หรือ info@etcthailand.com